Mr. Yu and his group left with satisfaction.

The first thing Mr. Yu did after he went back this time was to announce that he would postpone the launch of the next generation of flagship phones.

Originally, their flagship phones were about to be launched in one month.

At this time, Mr. Yu suddenly spoke out, saying that he would delay the launch of the new generation of flagship phones, which caused a lot of speculation on the market.

Many people are wondering if something happened to H Company?

After all, the previous series of bans by the Americans have brought a lot of losses to H Company.

Could it be that Company H is in trouble this time?

However, Mr. Yu did not publicly respond to the outside world's speculation, but just said on his neck: I want to make a new product plan, so stay tuned!

As soon as these words were said, the outside world was shocked.

You should know that there is still one month before the product is launched and released. You have to adjust your previous design. Are you kidding?

This shows that there is a very likely problem with their previous design.

This time it seems that Company H is really in a mess.

For a time, there were many different speculations from the outside world. Only some core figures within H Company knew what was going on.

Since returning from Bincheng, Mr. Yu has called all the designers of this generation of flagship phones upstairs for a conference.

The purpose is also simple, which is to allow everyone to re-type and design the internal structure of the mobile phone.

Make room for the carbon nanotube chips to be added.

In addition, the battery capacity and other things need to be redesigned. After all, an external plug-in has been added. Although the power consumption of this chip is lower than that of the main chip, it will still greatly increase the power consumption.

Fortunately, H Company has very deep technical reserves in this regard.

However, if you want to complete a redesign of a mobile phone within a month, it has made all designers worry.

Because this not only means making room on the motherboard, but the layout of many things in the mobile phone will also change.

Even the location of the cameras behind the phone, you should know that those cameras are the key to H Company’s fun.

Anyway, there will be a headache for these designers in the next two months.

The agreement made by Xinghuo Technology is that in a month they will send the trained system and hardware to H Company.

The rest is H Company's own hardware matching and installation.

This time, the main core hardware and even the supporting software were helped by Xinghuo Technology.

Xinghuo Technology has not charged a fee yet, but it will depend on their H Company itself next time.

At the same time, Xiao Feng's plane slowly landed at the airport in Bincheng.

He has been in Japan for a while, dealing with some complicated things.

In fact, it is mainly the issue of Omron's management rights.

Previously, Shintaro Fukugawa took over the Omron Medical Division in his wife, and with Xiao Feng's help, he was doing well.

As he became better and better, Omron's internal strife became more and more intense because of his two sons Duodi.

Shintaro Fukugawa quietly reached out and helped dig a lot of people from Omron.

It is these Japanese technicians who support the current electronic components division of Spark Technology.

As for other aspects of this company, such as their engineering software development division, Xiao Feng actually doesn't like it very much.

After all, now we are about to enter the era of carbon nanotube chips. With the upgrading of the new generation of hardware, all software industries will face a reshuffle.

And this time, there is no doubt that China will gain the upper hand in this change.

So he didn't mean to let Shintaro Fukugawa attack Omron's headquarters. He originally wanted to let Shintaro Fukugawa become famous in the circle.

Then he started against Nikon and Canon.

You should know that there are not many companies in the world that can independently produce lithography machines. In addition to the Dutch ASML, there are also Japanese Nikon and Canon, and Sansang from the Southern Dynasty, which can do it.

However, the technical level of lithography machines produced by Sansang in the Southern Dynasty can only be considered as the tail of the crane in this echelon, so I won’t mention it much.

What we need to mention is the technology of Nikon and Canon.

In fact, lithography machines were first born in the United States. At that time, the United States also had the famous lithography machine manufacturing companies of SVG and Ultratech.

But in the 1980s, these companies were defeated by Nikon and Canon in Japan.

By the early 1990s, Japan's Nikon and Canon were the absolute leaders in the field of lithography machines.

At that time, ASML was just a small sampan with only thirty-one employees.

The real rise of ASML must be said to be in the 1990s.

When the photolithography process technology broke through from 193 nanometer images 157nm.

At that time, Nikon chose the conservative route and planned to use F2 laser as the light source, but this approach was time-consuming and labor-intensive and costly.

At that time, Lin Benjian of Wanwan developed a set of immersive lithography technology that uses extreme ultraviolet light as the light source.

But when he was selling his own skills like a Japanese, he was rejected by the arrogant Japanese.

So Lin Benjian, who was holding his breath, ran to the Netherlands to find ASML, and ASML, who had no choice but to lose, decided to bet on this ticket.

Unexpectedly, they used Lin Benjian's technology and broke through the 153nm process chip earlier than the Japanese.

And this success made ASML famous in the circle.

At that time, Americans were looking for qualified companies that could check and balance the Japanese.

So I chose ASML. On the surface, this is a Dutch company, but in fact it is indeed a US-controlled company.

First, the company's major shareholder has become the world's number one person, and secondly, it is necessary to purchase American products in terms of light sources.

Moreover, 55% of the parts of lithography machines are purchased from the United States.

Then with the support of American funds and technology, this Dutch Asmay quickly occupied the circle.

And then he received a large order from American companies.

It is precisely with the strong support of the Americans and the investment of companies such as Samsung and TSMC, which was originally an unknown Dutch company.

It quickly crushed the original big brothers Nikon and Canon in the industry.

On the surface, Asmay is already the dominant player in the field of chip manufacturing.

But in fact, Nikon and Canon in Japan are still living quietly, but the limelight is not as bright as before.

At this time, the Japanese had already learned to keep a low profile.

But in fact, Nikon and Canon's technical level is really not that weak.

Perhaps they do not have the ASMA lithography machine now and can produce 5NM chips.

But they still have the technical strength to produce 10nm and 7nm chips.

Originally, Western countries did not have any technical ban on them, so these two companies have been quietly following Asmay behind their backs.

They are all waiting for a chance to turn the tables.

In fact, when Company H was sanctioned by the United States, these two Japanese companies had secretly shown goodwill to Company H several times.

At that time, domestic media also reported that a Japanese company was willing to cooperate with H Company.

In fact, this is not groundless. In fact, it is the people employed by these two companies in the country who are testing the waters.

First, we should see if Company H responds in this regard, and we should also see what the attitude of the Americans would have.

However, the Americans later gave a clear response and directly put pressure on the third increase in the limit.

Any company that uses American technology and American manufacturing equipment is not allowed to provide chips to H.

This cut off the path of the two Japanese companies, so since that time, news about Japanese companies wanting to cooperate with H Company has never appeared again.

But in fact, these two companies still have the technical strength.

After all, the most advanced chip manufacturing companies in our country can have lithography machines that are good enough to produce 28nm processes.

Even now, we are still in the R&D stage, and it is not said that we can successfully manufacture chips with 28nm process.

Japan's technology is actually more than three generations ahead of our country.

Considering the production process of carbon nanotube chips, some of them overlap with silicon crystal chips.

For example, on a carbon wafer, the photolithography circuit diagram is the process.

These all require lithography machines, so Xiao Feng asked Shintaro Fukuen to attack the two companies in Japan.

I plan to recruit some of the two companies to come.

Although the equipment may not be able to handle, it is quite OK to be able to get some core technicians.

For example, the current LED display technology in our country is an industrial chain built by poaching talents from the Southern Dynasty.

However, we have never been able to dig out core technicians from Sansang and LG.

Therefore, our breakthrough speed in the LED field will be slower.
To be continued...