People can move, so you also need to train the mobile target!

In this way, fifty rounds can train an artillery squad, which is already a miracle...

So in fact, the upper levels of the military have always known the problem, and they have never had any good ways to solve such problems before.

After all, it is very simple to improve the quality of soldiers, that is to practice.

Just take out sufficient ammunition and let the soldiers train.

But the shells are okay, but this barrel is enough to make people feel a headache.

The annual funding is only so much, but the ordinary gun barrel costs hundreds of thousands per one, while the large ones or tanks cost millions per one at a time.

If you really want the artillery to quickly form combat power, then dozens of gun barrels may be scrapped in a year.

And you can't say that you can just practice for a year.

In order to maintain the level of the artillery squad, you will also need training next year, which means that a squad will have to kill dozens of them next year.

And you have to constantly train new people, which means that your spending on the barrel will increase.

In fact, our artillery training is much better now than before, although it is impossible for the soldiers to fight openly like the Americans.

But at least, you can get a few or dozens of live ammunitions a year.

Of course, this is also distinguished from the situation of the troops. From the ordinary level to the A-level military service, the higher the level, the more opportunities you have to practice.

But this is far from enough, especially in the face of the current complex international situation.

Apart from the sea to the south, people are constantly provoking trouble.

There is also the neighbor who is constantly restless on the other side of the roof of the world. No one can say that these variables may burst one day.

Therefore, the best solution is to respond to changes in the same way, but how to solve the training problems of soldiers.

This reduces costs and becomes the primary headache for the military.

Previously, we had no good idea for the rifle of the barrel, so we could only hardly pile up the material.

Often, only one gun barrel is made, and more than a dozen or even dozens of gun barrels have to be scrapped.

Because this is really the most difficult step in the artillery process, because you can't see the entire process at all, and you can only complete the entire production process through the feeling of old employees.

Don’t say we can’t do anything, it’s the same even for the United States.

But they have a lot of money and wealth, and they have to waste it.

What is it like to make a gun barrel and destroy more than a dozen gun barrels? Even if hundreds of them are scrapped, they can still bear it.

After all, the trillions of dollars in military spending a year is not a joke.

The military expenditure of their family is equivalent to the total military expenditure of the next seven families.

If the money is not enough, then turn on the money printing machine and start printing. Anyway, the whole world has to pay for them.

This is the confidence of the Americans, but we don’t have the confidence that they have, so we can only find ways from other aspects.

So this time, when the military saw the robot that could drill holes for iron ingots in the Spark Factory appear, it was excited.

You should know that the rifling processing of this gun barrel is a very fine job and requires very precision.

Because the working environment of the barrel itself is very strict, the barrel often faces high temperatures above 3,000 degrees and huge impact forces.

Therefore, the wall of the gun barrel must be evenly thin, otherwise it will be very easy to cause cracks and even explosions due to uneven stress.

Therefore, when rifling, you must ensure that the depth of each rifle must be very uniform and neat.

A phenomenon of different depths must not occur.

Otherwise, you can wait for the shells to fly around, be kidding about accuracy, and even the explosion of the chamber.

This is also the main reason why more than a dozen or even dozens of gun barrels are often used to waste production of a qualified gun barrel.

Because even if there is no problem with the production process, strict inspections must be carried out after the production is completed.

Not only should we check whether the rifle is consistent in depth, but we should also check whether the wall of the gun barrel is evenly thin and thick. At the same time, we should also take a large number of X-rays to ensure that there are no cracks inside the gun barrel.

If it were the past, the military would not have any good solutions to such problems.

We can only rely on the masters of military factories to produce gun barrels entirely by experience.

But now they saw the industrial robots of Spark Technology, and they started to think about it.

This thing can actually drill holes in such a large pile of iron.

This is like carving on iron ingots, and the most awesome thing is that they even carved it into it.

They actually carved a very complex cavity structure on a piece of iron.

And this cavity structure is perfectly capable of a hydraulic valve.

This is quite amazing. You should know that even the United States does not have such technology yet.

If an enlarged version of such a machine tool can be made and used in the production of gun barrels, many processes can be reformed or omitted.

For example, the step of self-tightening of the gun barrel has always been using the hydraulic method in China, which is actually very cumbersome.

Moreover, we are not very good at hydraulics, so this step is actually very difficult.

It can be said that it is quite time-consuming and labor-intensive. The reason why we can persist is actually because of our low labor in China.

In the United States and Germany, they are actually using a brand new physical process to achieve self-tightening treatment.

To put it bluntly, it is to use a special equipment to penetrate a soft body deep into the barrel and continuously rotate and roll back and forth.

This physical method is used to eliminate stress on the inner wall of the gun barrel, which will be more effective than hydraulic methods.

But because we lack equipment, we have never been able to perform similar operations.

Now that we have such a machine tool, we can find a way to complete this step through this machine tool.

In addition, the step of processing the gun barrel rifling.

In the past, because I couldn't see the situation inside the barrel during processing, the rifling process could only rely on the experience of the master.

Now, the industrial robots of Xinghuo Technology can directly see through a large square iron ingot.

It also allows the drill bit to pass through perspective and then conduct precise navigation when working inside the iron ingot.

Let the drill bit move forward according to the set parameters at all times, so that processing will not fail because the inside of the iron ingot is not visible.

This is definitely a miracle.

As we all know, this must be related to the 3D perspective imaging technology jointly developed by Sunshine Hospital and the Ninth Laboratory.

But everyone didn't expect that this thing can be used in industry.

In the past, this kind of perspective technology was still acceptable to everyone when it was applied in the field of medicine.

But what makes everyone feel a headache is that the Ninth Laboratory and Sunshine Hospital have never published any papers.

They never explain the principles of this device, which makes many institutions who want to copy them hate it so much that their heads are hurt.

Not only those scientific research institutions in the United States, but also many domestic research institutions hate them so much that they are so angry.

In the past, there were no scientific research institutions in China. Under the banner of learning, I wanted to go to the Ninth Laboratory and Sunshine Hospital for inspection.

But every time, they beat him around.

No, if the other party's level is slightly worse, the Ninth Laboratory and Sunshine Hospital will be even more birds.

You are nothing, what do I ask you to learn?

Don't think we don't know your little thoughts.

And their actions have made many domestic institutions even more curious.

However, since the United States, Europe, and Japan, it has been reported that some people want to violently borrow such self-service physical examination devices, but they eventually triggered an explosion.

After the accident that caused casualties, many people with ulterior motives in China calmed down.

After all, it would not be worth it to spend your life in the end for such a device.

Although the military is also very interested in this equipment, it has never taken action.

Because the above meaning is also very clear, there are not many such good companies, and the team behind them also has a clear attitude towards us, so we should not cause trouble at this time.

After all, this company is also a good example for us in China.

Now that we learned that the team behind this company is very friendly to us, the military naturally can no longer hold back.

After understanding Minister Li and Secretary Zhang's requirements for Xinghuo Technology, Xiao Feng directly asked several cloning experts to discuss it.

The meaning of several experts is very simple, and this kind of gun barrel is completely a slight meaning to them.

Just enlarge the machine tool several times, and with their own flexible processing characteristics, as long as the drill bit is hard enough, the production cost of this gun barrel will be reduced by ten times immediately.

When the big guys on the other side heard such an answer, they could no longer bear it.

Even the big guys who had always had a serious expression before were a little unable to hold back at this time.

The production cost is reduced ten times? Doesn’t that mean that the soldiers can spend more money to train?

The combat power does not need to be increased ten times, as long as it doubles, they will be sufficient!

The atmosphere in the private room immediately became lively, and even several bigwigs got up to drink with Xiao Feng themselves.

After three rounds of dishes and five flavors, a big man wearing glasses suddenly asked again.

"Mr. Xiao, have you studied the aeroengines of helicopters?"

Xiao Feng heard this at this time, he was covered in black lines.

Boss, I am not a military expert, how can I understand the aircraft engine of helicopters?

But he also knew that there must be some problems waiting for the army.

He helped the Air Force, and the Navy had difficulties, so he stretched out his hand.

Now that the Army needs it again, he can only do good people to the end and send Buddha to the West!

"Well, I really don't know much about this. Otherwise, you can introduce the situation here and see if we can work together to overcome these difficulties together?"
Chapter completed!