The weapons of mass destruction that Japan has worked hard to get back was finally placed on the experimental bench, but the circle of people standing around were all isolated ten meters away. Each person had a telescope-like object fixed on his head to observe the weapons of mass destruction that were more than ten meters away. The specific operation was accomplished by several sets of robotic arms hanging on the roof.

This robotic arm is not a computer-controlled robotic arm. It is an ordinary lever, a linkage mechanism composed of gears and springs. The operator puts his hand into the gloves of the robot like a robot. Then, no matter how he moves, the robotic arm over there will move. It is just a very ordinary mechanical transmission, but the accuracy of our work is quite exaggerated.

The reason why we have to isolate the researchers so far from the weapons of mass destruction in front of us is actually for safety reasons. After all, what is in front of us is too dangerous, so our temporary laboratory has specially made a little special protection for this. The one supporting the weapon of mass destruction is not a simple workbench, but the thing is actually empty, with a vertical well that has penetrated the crust and penetrated into the mantle.

Once the weapon of mass destruction in front of us has an accident, the entire test bench, connected to the surrounding three-layer crystal wall, will drop to a depth below 2,200 meters underground within five seconds. In that kind of place, even if it really explodes, it will definitely not hurt people. This is the best protective measure we can think of now, and there will be no problem in general. The only thing we have to worry about is that if the explosion of this thing is a moment of zero delay, we can only expect that the three-layer crystal wall can last for more than one second.

"Come on the demolition now?" asked a research player.

"Wait a little longer." A NPC scientist's voice came from a crystal communication machine next to him and said: "Just just heard from the guild administration department that the president is going to your side later, so you can wait a while."

"Don't wait, I'm here." I just pushed the door and walked in while a few people were talking.

Several researchers greeted me briefly, and then one of them began to ask, "Then are we going to start now?"

I nodded and said, "What are you waiting for?"

After hearing my words, several researchers quickly ran to their respective operating positions and reached into their operating gloves. After trying to move their fingers, the robot on the opposite side immediately moved accurately, just as convenient and flexible as the researchers' own hands.

"Okay, get ready to start," said the best-skilled group of researchers standing on the central operating table.

Several players around him immediately nodded and began to focus their attention on the weapon of mass destruction in the center. The researcher in the center used the robot to pick up a cross-shaped screw rotator on the table next to him and ordered several others: "Help me keep an eye on the status monitor, tell me immediately if there is any change."

"Okay. Just disassemble the golden finger, and we will help you monitor the status monitoring."

After receiving the answer, the person in charge began to concentrate on controlling the robotic arm. First, he used the screw rotator to aim at the screw hole on the side of the weapon of mass destruction and pressed it on it. Then he shook the shaking handle behind the rotator. The rotating head at the front immediately began to fly. As the rotation head rotated rapidly, the screw quickly retreated from the screw hole at a speed visible to the naked eye. Finally, it completely broke away from the main body and was removed.

In fact, this kind of screw rotator functions the same as a screwdriver. The difference is that the screw speed under this thing is much faster than that of a screwdriver. And more importantly, this thing does not require frequent impacts on the screw interface. For some equipment that requires high precision, the rotator is obviously more useful than a screwdriver.

There are not many screws on this weapon of mass destruction on the operating table, but none of them are very long and they are very tightly fixed. It may not be possible to use an ordinary screwdriver.

Soon after the circle of screws was removed, the operator immediately used a suction cup to suck several shells outside and pulled them out hard. A larger metal plate was immediately removed. Several researchers next to him quickly helped remove the several metal plates connected together next to the metal plate. The shell of this weapon seemed to use a design similar to the Luban lock. Except for the first metal plate fixed with screws, the remaining metal plates were pressed down under the metal plate. The fixing parts behind were also nested one by one, and they were stuck together. As long as the first piece came down, the parts behind it would fall apart.

"How could this be the design?" A researcher asked in surprise at the metal guard plates scattered all over the floor. Just now, when the first researcher opened the guard plates, they immediately found that other guard plates began to loosen. So they quickly used their mechanical arms to help support the guard plates. Who knew that before they could hold the entire bullet, they had disintegrated themselves and fell all over the floor. The structure inside the entire bullet was completely exposed to the air.

Several researchers next to him were also stunned at the shell guards all over the ground. They just removed a fixed board, but they didn't expect that they would have such a reaction.

"Will it be designed on purpose?" I looked at the researcher over there and said: "I have seen the live-fire shooting scene before. When this thing explodes, a kind of particle light particle will spread around it. Could it be because this thing itself needs to spread and erupt, so it is set up a shell that is convenient and quick to fall off?"

After hearing my reminder, several researchers there began to think about it, and then nodded to say that it is very likely that what I said. After all, the explosion method of this thing is a bit like a cluster bomb. Particle dispersion is required before actual killing occurs. In this process, the shell will only hinder the work of its internal components, so the shell must fall off in a very short time. This nested shell is obviously very suitable for use in this situation. Because it can easily disintegrate the entire shell. As for the strength of this shell, I think this is not a problem at all. This thing is a weapon, not an armor. The only function of its shell is to prevent the internal structure from colliding during transportation and launch. This shell is not used for protection at all. In terms of the volume of this thing, even if it is a solid metal stick, it is definitely easy to be destroyed, so for it, the protection is actually not important.

After understanding the design of the shell, the real internal elastic structure is broken down. The internal structure of this thing is quite complicated, and a large number of metal screws and magic fusion agent are used to connect. The screws are easy to deal with, just screw them off directly, but magic fusion agent is troublesome.

The properties of this magic fusion agent are a bit similar to the model-specific glue. Those who have played with plastic assembly models may know that there is a special model-specific glue. This thing has no stickiness in itself and it will not stick other things together, but this thing can easily make the plastic and plastic stick together. In fact, this glue does not make two pieces of plastic stick together at all. It melts the surface of the plastic you come into contact with, and then because this model-specific glue has a relatively strong volatile nature. When it volatilizes naturally, the dissolved plastic solidifies and becomes a whole. It is like two pieces of ice. You press them together, then melt their contact surfaces over fire, and then freeze them again. When the melted ice freezes again, the two pieces of ice become a piece of ice, and there is no gap.

This magic fusion agent also has similar abilities. As long as it is the same substance, it can quickly connect the two. Even if you use an ultrasonic flaw detector later, you cannot find the connection trace. Of course, although the internal fusion is very thorough, the outer joints will become uneven due to the softening process during the connection process. Therefore, it is not difficult to find the connection point. The difficulty is that this connection point is not much different from a whole piece of casting. Even if you find it, you will have no choice but to do it.

Although our technicians quickly removed all the screws, the connection points connected by the fusion agent gave us a headache for a long time. In the end, an NPC technician who used a communicator to observe the disassembly process remotely came up with a solution. The method he proposed was actually very simple, which was to ask the gold-eating bug to help nibble off these connection points.

Compared to our equipment, the gold-eating insects gnaw more quickly and accurately, and they will never bite things that should not be bitten. You should know that these metal structures that look integrated are not actually completely solid. Some steel beams and other things have holes, and there are wires and other things in these holes. If we are asked to use the equipment, it will definitely not be a problem to remove the steel beams, but these wires should not be expected to stay, and they will definitely be cut off together. Therefore, we cannot damage the wires, and we have to cut the steel beams. We can only rely on the help of the insects.

Next to the Steel City is the Zerg breeding base of our guild. The Gold-Eating Worm has been helping us mine steel from Steel City, so it is very easy to get a few.

With the help of the gold-eating bug, the steel beams were quickly cut open. Then the researchers carefully sorted out the lines and found the source bit by bit and divided the uses of various instruments. If they could be removed, they would be removed and studied. If they could not be removed, they would not be moved. Finally, after eight hours of hard work, the initial entire weapon of mass destruction finally became the pile of parts in front of us.

These are not basic parts. The pile of parts in front of us should be said to be just partitions that we can initially disassemble. Some parts are actually combined with many things, and even components with different functions have not been disassembled yet. However, because we don’t know how to disassemble or dare not disassemble, these things have not moved.

"President, what we can do now is here." Several researchers who were so tired that they were about to lose their lives were all sitting on the ground without any image. Although this thing in front of them was so big, its power was exactly equivalent to a small-equivalent tactical nuclear bomb. If it were you, you would not be burdened in your heart? Because of the burden, these researchers were always in a state of high mental tension during the entire dismantling process, which was just like a doctor doing surgery on the operating table. It would be really possible to kill someone if you accidentally have a life. However, the doctor did not die if he had a problem, but only one person died. If they had a problem, not only would they die themselves, and there was no idea how many people would be involved in the surroundings. Therefore, the psychological burden of these researchers was greater than that of the doctor when he had an operation.

Looking at the researcher who was so tired that he seemed to fall asleep at any time, I quickly comforted him: "It doesn't matter, it's almost done here. You all go to rest first, and I will arrange the next thing."

"Okay president." After answering, several people walked out like a walking corpse. Even if they wanted to rest, they could not rest here. It would be better to go back to Aisinger to use his advanced dormant system to assist sleep. Using that thing to assist sleep is much more effective than sleeping in reality.

They went to rest, but I couldn't run away. The mess in front of me still had to be dealt with. First of all, the piles of things piled under the operating table must be transported away first. These are the metal keels in the weapon of mass destruction and some integral castings without internal structure. These things account for a large proportion of the weapon of mass destruction, but in fact they do not have much technical content and are also very safe. Before, they were tied to weapons of mass destruction, so they could not mess around. Now that they have been removed, of course they can be sent directly to the New World Research Center for analysis and research. Anyway, these things will not explode.

In addition to these fixed metal parts, there are some functional components inside this weapon of mass destruction. These things are used to control or operate this weapon of mass destruction, and they have no direct relationship with their lethality. Therefore, they are also considered safety components. These things can also be transported away and studied slowly, and there is no need for the high-risk laboratory here to continue research. Although our guild temporarily built such a research room for this dismantling, this is a temporary thing after all, and various experimental equipment and personnel are not enough. Moreover, it is too dangerous here. I dare not let the senior NPC researchers in our guild come over. Therefore, in order to speed up the research progress, I still have to send the things for research.

After getting rid of these parts that are not explosive or have no lethality, there are only two items left on the test bench.

"This is the explosive part, right?" said the researcher who was watching the operating table remotely through the communicator.

I stood in the position of the operator before, and used those robotic arms to grab the two devices connected in series with two supercharged magic wires, and then said: "Please note that this large thing on my left hand shows a high energy reaction, but the perspective shows that there is only one liquid substance inside this thing and there is no mechanical parts. Although the thing on my right hand is small, the internal structure is very complicated. We suspect that this is the detonating device. The problem is that the two are now connected together, and we don't know how to separate them. Do you have any opinions on it?"!~!
Chapter completed!