(Khan, there was a major mistake in the previous chapter. The airport area was written with one ten thousand words and 50,000 square kilometers... Thank you for pointing it out in time, and it has been revised.)

At the Space Shuttle Research Institute of the Space Center of Fuyun Group Space Exploration Company, Longling Town, Li Fu, Yu Liang, Chen Bin, Cao Haitao, and Yang Yiping, each wearing a white coat, followed by a huge team of hundreds of people, and was spinning around a huge aerospace plane.

This huge aerospace plane was made by the company according to the rules. Its specifications, sizes, internal structures, etc. are exactly the same. However, the performance is not much worse, and Li Fu even dared to ask someone to test the flight because there are too many problems when testing the plasma engine.

Not only is the thrust far lower than the aerospace planes manufactured by the state, but it is also very unstable. Obviously, although the same technology and materials are used, the things made are from heaven, underground, and all of them can often travel back and forth, and the other does not even have the courage to test flights.

"Brother Fu, this is our imitation of the space plane. Although it looks similar, the inside is too different."

Chen Bin shook his head and told Li Fu that he didn't think it was too difficult when he participated in the research of the "Divine Arrow" fighter jet. Now he realized that everything was difficult when he built it from scratch.

"It is not easy to be imitated. The key now is the processing accuracy of the core engine blades, and the overall performance of the aerospace plane. As for other problems, some small problems are not difficult to solve."

Yu Liang also sighed. Although this imitation of space plane seemed to be unable to take off, Chen Bin and others spent more than 5 billion Chinese coins to imitate it, which can be said to be piled up with gold. And I encountered many difficulties in it, and it was very difficult to overcome it one by one.

"Actually, I think even if we increase the processing accuracy and increase the yield rate of material processing to an acceptable level, it is still unrealistic to keep the cost within 1 billion. I think we cannot follow the old path, we should take a new path ourselves, which can greatly reduce the cost of aerospace planes."

Cao Haitao touched his chin, thought carefully in his mind, and spoke slowly.

"Continue talking."

When Li Fu heard this, he became interested immediately. Li Fu boasted about Haikou to the country. As long as he asked himself to produce airplanes, he could sell 1 billion Chinese coins to the country. If he produced airplanes according to the current method, the cost would definitely not be reduced to less than 1 billion Chinese coins.

What's more, Li Fu wants to make money by selling short-sky planes in the future. According to the company's consistent principle, a thing worth 1 yuan must be sold at least hundreds of times before it can be considered a high-tech enterprise. If the 1 billion Chinese currency sells short-sky planes to the country, the cost must be controlled within tens of millions of Chinese currency, or at least within 100 million Chinese currency.

"Not only the core plasma engines, the airplane has more than 50,000 parts and components, and the production processes are different and very complex. In addition, the assembly is very complex and time-consuming. If the core plasma engine is included, it will be even more complicated."

"Such a huge project is very important. There cannot be any errors. If we still manufacture it according to the previous production methods and methods, the cost will be difficult to reduce, so we must adopt new ideas and methods to design and manufacture aerospace planes."

Cao Haitao carefully sorted out his language in his mind, and then spoke slowly.

"In the history of the development of automobiles, when cars first appeared, they were rich and exclusive to powerful people, and ordinary people could not afford them at all. Until the Ford Model T appeared, the manufacturing cost of cars was greatly reduced. Even ordinary people could afford cars, and cars gradually entered ordinary families."

"Our aerospace planes can actually refer to Ford's automobile manufacturing ideas and redesign the aerospace planes. Don't be bothered by the previous ideas. Use a new modular design as boldly as possible to significantly reduce the components of the aerospace plane. Only in this way can we greatly reduce the cost of the aerospace plane."

Cao Haitao used the virtual machine on his wrist to put out all the ideas in his mind. On a huge monitor, Cao Haitao tried to change the shape of the aerospace plane and remove the wings. The style of the aerospace plane became fatter and thicker, and it looked a bit out of place.

"This is what I initially imagined. If we can remove the wings of the aerospace plane, the components of the two wings alone can be reduced by more than 5,000."

"In fact, the most important thing for aerospace planes in the future is to be used in space. In space, the shape design of the aerospace planes does not need to be considered in air at all, so we can design them as simple as possible and more practical as possible."

While listening to Cao Haitao's speech, everyone carefully thought about Cao Haitao's ideas on new ideas about aerospace planes.

"Cao Haitao is still very thoughtful. His current thinking has the tendency to classify aerospace planes. If this aerospace plane has been developing, it will be classified according to its functions later. It can be roughly divided into two categories. One is aerospace plane specifically used for round trips to and from the ground, and the other is aerospace plane specifically used for space."

"Aerospace planes that travel back and forth to the ground naturally need to consider the issues of air resistance and buoyancy. There are relatively more problems to consider when designing, and it is more difficult. Aerospace planes specially used in space can no longer be called space planes, but should be called spacecraft. Because this type of aircraft does not need to enter the planet, the most consideration is space capacity, maneuverability, and thrust when designing. "

In my mind, Li Fu combined the development history of future spacecraft in the seeds of super civilization, and naturally he was very clear about the future development direction of aerospace planes. Now when he heard Cao Haitao say this, he couldn't help but give Cao Haitao a thumbs up.

"I think Cao Haitao's idea is still very correct. Our goal is to use aerospace planes as cars, greatly reducing the cost of aerospace planes, so that ordinary people in China can afford to buy aerospace planes in the future, and they can also fly aerospace planes to and from space and the earth freely."

Li Fu praised Cao Haitao's ideas. Many things need to be clarified first, so that there will be goals when developing in the future.

In fact, Li Fu wanted to take out anti-gravity technology. If he used anti-gravity technology, he didn't have to consider any aerodynamics, air, and even a runway.

However, Li Fu doesn't want to take out anti-gravity technology too early now. Now his team is still a little too immature. However, they first study aerospace planes and practice their skills, and their company also accumulates experience. After a few years, when everything is relatively mature, they will take out anti-gravity technology, and everything will come true.

...

Since determining new ideas and future development directions, Li Fu has also been in the space flight research department every day, leading the team to start redesigning a brand new space flight.

Li Fu also wants to manufacture aerospace planes on a large scale as soon as possible, reducing the cost of airplanes to less than 100 million Chinese coins. On the one hand, Li Fu naturally needs a large number of airplanes to develop his own space power, and on the other hand, it is to greatly promote the entry of Chinese private forces into the space industry.

With Li Fu's joining the team, all the problems are no longer problems. The material processing accuracy problem that has troubled the team for a long time. On the one hand, Li Fu has dug several top experts in the material processing field through Liu Shiying, and on the other hand, it is combined with the scientific and technological knowledge of the material processing field of the super civilized Han Science and Technology Empire.

In less than a month, the processing accuracy of materials has been greatly improved. Although I dare not say that it will surpass the most advanced level in the West at once, at least the processing accuracy can reach the international first-class level. Of course, what is more important is the greatly improved processing yield.

In the past, the yield rate of a few percent was quickly changed to a waste rate of a few percent. Not to mention anything else, just this part, the cost of the entire aerospace plane instantly reduced to about 1 billion Chinese coins.

However, Li Fu and others obviously would not only meet this. The goal of the entire team is to design a cheaper and more reliable aerospace plane.

PS: Please vote, please vote!
Chapter completed!