Font
Large
Medium
Small
Night
Prev Index    Favorite Next

Chapter 167 Television Picture Tube

Li Sanbiao took the train and came to the port of the Shaanxi Province to come up with an introduction letter.

Unexpectedly, the old man who watched the door immediately called the two big -shaped big men, both of which were defended in the factory.

Li Sanbiao is a bit covered. As for such a big posture? Could it be unsafe here, need safety protection?

He quickly discovered that the targets of these two people were actually themselves.

Li Sanbiao secretly went in to analyze the planning of the production line, and he was very resentful in his heart. He simply settled: "What level of your factory?

/p>

Two defense was shocked. The 789 factory was a benchmark -level factory. How much is the deputy factory director?

They looked at Li Sanbiao, but they were only twenty -five years old. How could it be the deputy factory director?

Liars? There are a lot of these years, but where is the liar who come to see the director of the factory? This introduction is not fake.

The two of them didn't understand, in case of deep background and maybe, in accordance with the principle of shirk responsibility, hurriedly reported to the factory.

The director of the imaging pipe factory, in the past, was the leader of the Shaanxi Provincial Economic Commission. After hearing this requirement, his face was ugly.

This is the all -out in Shaanxi Province. He personally negotiates with Toyo and has gone through all the projects that has been hardly taken down in order to dominate the display market. How can the 774 factory be stolen?

But he heard Li Sanbiao's name, knowing that he was in 772

The director of the factory euphemistically: "Comrade Li Sanbiao, our factory spent a lot of money to learn from others' technology. You look at it like this, isn't it appropriate?"

Li Sanbiao said that it was reasonable, and took out a check of 10,000 yuan, saying that it was a visit to study.

The factory director smiled and shook his head, said; "Our portrait color tube has five or six hundred or six hundred or six hundred, Toyo technology, the first in the country, do you say I will be greedy for you?"

Li Sanbiao said; "Your imaging tube production line, I think it is also a second -hand? As far as I know, the Japanese side did not give you the best technology to you."

The factory director didn't like to listen, and lifted the tea cup road: "Then I don't care, we can pull out in China. Except for the import tube, it is us! Don't be afraid to offend people.

It's just a word, no show! "

Li Sanbiao laughed without saying a word, turned his head and walked away, saying: "It's a pity, since you don't exchange Tele Long and Chunping's technical patent, then when I don't say it."

Tri Long? Chunping?

The director quickly stopped Li Sanbiao and said with a smile; "Don't leave, brother, sit down and chat."

Li Sanbiao was unreasonable and said, "No, I still rushed to Hongguang Electronics Plant, that is our brother unit."

The factory director laughed and said, "We have nothing to discuss, isn't it just a visit? You told me how you got these two patents."

Li Sanbiao wrote casually, saying that his classmates were exposed to in Japan.

The director of the factory was suspicious, but after thinking about it, even if this Li Sanbiao looked at the production line, he couldn't move away, but it was nothing. In case the two patents were true, they would send it.

Electronic pipe factory usually comes with a gas factory, which produces oxygen and other flammable gas, not for heating, but to sinter various vacuum pipes.

For example, the process of burning the gun is the key process in the production and assembly of the electronic gun, and the gun burning machine is the key equipment for this process.

The gun burning machine is a large household rogue. By mixed with gas and oxygen gas tanks, after the fire head sintering, after melting to a certain degree, the main parts of the electronic guns, such as the cathode, heating pole, thermal heating, thermal heat, thermal heat, thermal heat, heat

Press the wire resistance, glass hood and other pressure -matching. After cooling, take it out, and it is made into an electronic beam launch device, called an electronic gun.

This is one of the core craftsmanship of the imaging tube. What is close to the electrode material is closely tested and each one is different.

Because the electronics industry must be vacuum, the internal pressure is very large, but the step of assembly will not be done well, and it will be internal stress. Under the internal pressure of heating, the TV will explode.

Don't look at the backward performance of the CRT display, but the process requirements must first get a oxygen tank factory,

Several levels higher than those of ordinary electronic factories in Hong Kong merchants.

Not to mention the small factories in Guangdong, that is, there is no such technology in the entire Xiangjiang.

Li Sanbiao carefully watched the production process, including the detailed information such as controlling temperature, and took out the camera to take several gel rolls. He analyzed the machine again and asked a lot of questions with the workers with him before leaving.
P>

The factory director's face is very ugly, this is simply a bold technical plagiarism, the Tao; "Comrade Li Sanbiao, are you not doing so?"

Li Sanbiao said with a big words: "I give you the exclusive patented technology of Toyo, you can't even reluctant, then we still do not technical exchange!"

The factory director couldn't, Li Sanbiao looked at the workshop that produced the fluorescent screen one after another. Li Sanbiao saw the process of painting fluorescent powder with his own eyes, and once again made a record.

After watching the whole set of processes from production to detection, Li Sanbiao also analyzed almost,

Li Sanbiao cleared his throat, and said, "OK, my business is over, what about the technical backbone of your factory?"

The director called the chief worker and several engineers, surrounded by Li Sanbiao.

Li Sanbiao told them that Tri Long's technical points are to increase light transmission, so change the shade to a strip -shaped gang.

"This kind of strip -shaped gill, fixed in a large tension frame, consists of a parallel vertical iron line array, from the top of the screen to the bottom of the screen.

Hit it on the fluorescent strip to glow, so the brightness is very high, the color is bright and delicate than other imaging tube systems.

"As for pure flatness, the visual error is caused by the refraction of the edge of the screen. You can do it opposite. According to the visual error of the human eye, calculate the curvature rate and turn the edge of the screen into a lens. You can make the error.

Correct it and eliminate the phenomenon of inner concave. "

The factory director and several engineers understood a little bit, and let Li Sanbiao explain the details carefully.

"Damn, these Toyo companies, have such good technology, do not give us, have occupied the high -end market, this second -hand production line is still so expensive, there is no sincerity at all!"

"It's too much, they just take us as a waste recycling station!"

Li Sanbiao laughed without saying a word. In fact, these technologies were about patents around 1990. This is really wronged.
Chapter completed!
Prev Index    Favorite Next