Chapter 154 The big deal is coming

Author: half west wind half sand

Chapter 154 The big deal is coming

Ji Donglai was writing a report in the library. Looking at Ding Aixing's phone, Ji Donglai felt strange. Lao Zhao was following the things at the factory, so Ji Donglai was not too worried.

"Master, it's a big job. You'd better come back and take a look. Master Zhao's hair is almost pulled out! Master Zhao can't understand the drawings from the elevator factory. We are not as good at drawing as you..."

On the other end of the phone, Ding Aixing looked at Master Zhao next to him, and then at the pile of drawings on the table. His expression was not good. The English drawings alone made this group of people confused. The symbols and technical requirements inside

too difficult.

Besides, Ding Aixing has never seen the material of this product, so he cut it without permission. Ding Aixing is really worried that the equipment will be damaged.

Ji Donglai hurriedly finished the last few data on the report, and said hello to the teacher to return to the factory. It was going to be a holiday soon, and all the students started buying tickets.

"Damn, what a big job!"

As soon as Ji Donglai entered the factory, he saw several large castings on the ground. Strictly speaking, these should be precision castings, but they were definitely enough.

It is more than three meters long, half a meter wide, has six claws in the middle, is thirty or more thick, and has an overall arc shape.

There is a huge bulge in the middle, and there is a lot of oxide scale on the surface of the product.

There are six products of the same type and more than a dozen small castings, all packed in wooden boxes.

"Let me go, 345! This is the base. It's all the work of the machining center. Let's go see when the work of our machining center is scheduled. First, take out the syringe mold, right away!"

Looking at the densely packed standard drawings and the technical requirements, Ji Donglai wiped his face. Old Zhao over there felt relieved, and Ding Aixing also hurried downstairs.

"Can we handle this job?"

The rest of the people ran out, and Cui Mingyan walked out of the office with a coffee cup in hand. She looked at Ji Donglai frowning at the drawings and came over.

"Processing is no problem. The main thing is to study how to separate certain processes to the milling machine. The machining center will be of great use! It would be great to have a large vertical lathe, or a large boring machine. These tasks

It’s a waste to go to the machining center!”

Looking at the important markings on the drawings, Ji Donglai felt regretful that he still had few equipment here and the overall scale was still a bit small.

"What does a vertical car look like? Do you have any photos?"

Cui Mingyan's beautiful eyes moved when she heard Ji Donglai talking about setting up a car. Ji Donglai described it again, but the other party still didn't understand. There was no network in the factory, so Ji Donglai had no choice but to give up.

"Mr. Li, I'm sorry to bother you so late at night!"

After reading all the drawings, Ji Donglai took another look at the products downstairs and simply tried to call Li Dequn. Unexpectedly, Li Dequn was still in the company.

"It's okay. The company is still busy now. The tasks assigned by the general manager must be sorted out. It turns out that there is a bit of a mess here! What do you want from me?"

Knowing the relationship between Ji Donglai and Zhu Cunxin, Li Dequn now has a particularly good attitude.

"That's right. Isn't this the machining part drawings we just received from our company? If we have any rough drawings over there, please give me one. I will configure it according to the rough drawings!"

"I took a look at our blank and found that the shape is too different from the final product. If you cut it too hastily, it will damage the machine!"

According to Ji Donglai's experience, all foreigners' drawings involving castings have rough drawings. With the rough drawings, Ji Donglai can directly input the product dimensions, and then the programming will be much simpler.

"Didn't I bring you there? How do these people do things? Damn it! Wait a minute!"

When Li Dequn heard that Ji Donglai asked for the rough drawings, he frowned and patted the partition. His subordinates hurriedly found the drawings and distributed them for records. Li Dequn's eyes narrowed.

"I'll send it directly to your email later. You can print it yourself. I'll give you the official drawings here next time you come over to send samples. Sorry, brother, we made another mistake!"

Li Dequn felt itchy with hatred when he saw that only the finished drawings were issued in the drawing distribution record.

According to management regulations, drawings are issued to enterprises directly affiliated to the factory. Especially for products processed with materials, the blank drawings must be brought with them. Otherwise, wouldn't it be nonsense if the processing unit does the processing in the dark? Not only is the processing accuracy slow, but it is also prone to unpredictable problems.

.

"It will be very incense if you send it to me. Thank you, Boss Li. I will go to Tianjin to treat you to dinner when you have time!"

After putting down the phone, Ji Donglai immediately felt relieved and immediately started to build the finished product model. Once the rough drawings arrived, Ji Donglai used the finished product drawings to provide data, and the product processing route was figured out.

"Who sent the drawings?"

Li Dequn sent the electronic version of the drawings to Ji Donglai, then turned his eyes to the office, scanning the faces of his subordinates.

"Zhang Xiwei, Viagra!"

Several of his subordinates said that the expression on Zhang Xiwei's face was very unnatural, and Li Dequn also slapped the table, wanting to find something and throw it out.

The other party is a very nice young man on the surface, with good height and decent appearance, but he has diarrhea when doing things.

Zhang Xiwei recognized a master in his work unit, and the old man entrusted Zhang Xiwei to Li Dequn before retiring.

Li Dequn took care of him again and again, but he really couldn't help him up! You asked him to look at all the rules and regulations, but he just wouldn't look at them. He just kept doing things his own way.

"When I come back tomorrow, let him leave the workshop until he leaves the factory by himself. What the hell? The general manager is currently rectifying various departments and even gave me eye drops!"

Clenching his fist, Li Dequn slammed his fist on the table, causing the water glass to fly half a meter high.

Twenty minutes later, Ji Donglai came here and printed out all the drawings, followed by a long modeling process.

"Ai Xing, you create the rough model and give it to me, mark it according to the drawing numbers on the top. Master Zhao will mark the rough drawings below according to the size of the rough. Wait for the programming here to finish and get to bed immediately!"

After briefly looking at the drawings, Ji Donglai broke down the work again, and everyone began to work in batches.

In two hours, the complete model of the machined part was built, and the rough model of Ding Aixing was also just built. Ji Donglai carefully checked the dimensions, modified several places, and then started programming.

The biggest difference between UG and other 3D software is that the tool library is very complete. When programming, as long as you set the path and select the right tool, there will be no problem.

Ji Donglai kept busy selecting coordinate points for more than an hour, and finally got the program out and then tried it out.

The tool retraction distance was readjusted several times by Ji Donglai, and the final program was finalized. Ji Donglai then went directly to the mold workshop.
Chapter completed!