Chapter 237 Can you buy this product in bulk?

Author: half west wind half sand

Chapter 237 Can you buy this product in bulk?

"Their molds are definitely not qualified. We all require mold designers to process parts at a constant temperature. They don't have this condition at all. The products they produce in the future will be 100% unqualified. If you don't believe it, just watch!"

After staying for a day and running back to the factory, the other person described Ji Donglai's bad qualities in the factory, and the people around him looked at each other in confusion.

Li Ming just walked to the door with a cigarette in his hand. He stopped when he heard the other party's words. The other party continued to describe the backwardness of Ji Donglai's factory. Li Ming took out the cigarette from his mouth and stopped smoking.

After thinking for a while, I picked up the tool bag and drove to Ji Donglai's factory.

At this time, most of the set of molds had been processed and were being assembled. Ji Donglai happened to be following him, and when he heard Li Ming coming over, he took it out directly.

"Dong Lai, do you also do the final molding of your products? I think your equipment there is average. If you have good equipment, can this product be packaged for you?"

Looking at the complex mold designed by Ji Donglai, Li Ming was not only surprised but also very happy at heart.

After all, this means that he has not found the wrong person, not to mention that his junior brother has succeeded, which also means that his efforts have not been in vain.

"Sure, I not only have a horizontal injection machine, but also a vertical injection machine! The rubber springs over there have begun mass production. They are exported and are targeted at Europe! But they are similar to the equipment in your factory.

There is definitely a gap..."

Ji Donglai was surprised and excited when he heard that Li Ming wanted to package the entire product for himself. After all, it meant that he had successfully entered the field of auto parts.

Once this expansion is successful, I can even enter the three-guarantee parts field with this product in the future.

In the future, cars will become the most common means of transportation around the world, and there are many big names in this industry who also started out as auto parts manufacturers.

Ji Donglai hurriedly took Li Ming to visit the two injection molding machines he was renovating. The large rubber spring injection molding equipment had been renovated, and the molds were automatically opened and demolded! It is now very labor-saving for workers to make this product.

, just simply lift the product out with gloves, cut off the flow channel, and you're done.

The small batch orders for Abbas's products have been issued, totaling 500 pieces. Ji Donglai simply opened the experimental mold into a batch mold, and the workers are working on production.

When Li Ming came over, the latest product was just coming out of the mold.

"Whoa!"

"Damn it, Donglai, your equipment modifications are awesome!"

Li Ming was also shocked when he saw that such a large product only required workers to press a button, and then the equipment automatically split the mold and ejected the workpiece, and the worker could directly move and clean the mold.

You must know that this kind of structure has not been achieved in all state-owned factories. Most rubber molds are still manually released. This is determined by the nature of rubber products.

Most rubber products are soft and difficult to launch directly like plastic products. So over time, people have become accustomed to that design, even for large state-owned enterprises.

No one thought that a small factory like Ji Donglai could change its equipment to fully automated and now produce such beautiful products.

And it can be seen that the injection volume of this equipment is very large. The worker pushes the mold back again, and the injection has already started on the equipment side. The worker only needs to feed the rubber strip into the feeding port of the injection machine.

"Hey, it's hard to find good workers, so it's hard to force me to do it! You see, every one of my workers looks after three machines and equipment. There is only so much space in our factory! The bigger it is, the easier it will be to attract attention.

! To be honest, I am worried every day when I work here because I don’t have a land certificate!”

"There are too many workers, so the police have to be sent to patrol. This is not a large industrial area, and you have to apply for various documents to patrol... Why don't we put some thought into the machinery and equipment! The equipment is highly automated.

Now, I don’t need so many workers here, right..."

Regarding the modification of equipment, Ji Donglai directly said that he was greedy for money. In fact, everyone could see that it was for efficiency. Rapid mold parting means shorter production intervals and shorter mold cooling time.

This means less heating power, and the volatilization time of the adhesive is also shorter, and the performance of the product will be greater guaranteed. Li Ming noticed that Ji Donglai's employees also placed several other skeletons on the mold at this time.

Warming up, this will never happen in state-owned enterprises.

There are not many such iron clamps or metal bonding parts there, but so far I have never seen a worker do it this way. This is an effective way to reduce costs.

"You kid doesn't tell the truth, but that's fine. This way your profit point can be higher! The product package is not fake for you, but the price won't be particularly high. You also know that we have to charge management fees! You can use the appropriate situation

You can explore the market yourself, there is no confidentiality clause for this product!”

Seeing that his junior brother can make these things so well, Li Ming is completely relieved. Now it all depends on his junior brother's experimental speed of this product.

"Master Liu, speed up the transformation. Our product will be tested on this machine and then produced!"

After sending Li Ming away, Ji Donglai turned around and found Liu Jiahui. The other party was taking a rest now. Because the equipment transformation cycle is not short, the other party was not in a hurry!

"Okay, kids, hurry up, the boss has given the order! The back plate of the mold needs to be modified, let's get started!"

Hearing that Ji Donglai was anxious, Liu Jiahui stopped talking nonsense and called a few brothers to start working!

The other party still pays for the mold cost, and the rest is the production cost that Ji Donglai reported to Li Ming. The materials are from the other party, as are the molds. Ji Donglai adds equipment wear and management fees, and other profits.

Ji Donglai charges the other party fifteen yuan for the manufacturing cost of each product and ignores the rest.

Because we are processing molds from the factory for ourselves, the processing workshop can do it faster and more precisely.

The experimental mold was made by He Xiaolong himself. The whole piece of cloth and rubber was cut into strips, and the leftovers were sorted and then kept on hand to wait for the edges to be mended.

The core was wrapped with cloth rubber, and the mold was manually closed. After the mold was closed, red rubber continued to squeeze out from the mold closing gap. He Xiaolong reopened the mold, stuffed the rubber back into the mold, and closed the mold again.

After three adjustments, He Xiaolong weighed the final amount of rubber with an electronic scale. The last amount of rubber minus the amount of rubber spilled this time was the final amount of rubber. Then he waited for the workpiece to be formed.

"Whoa!"

"Buzz!"

"It's done, it's done!"

As the mold set time arrived, the machine automatically opened the mold. He Xiaolong watched closely as the product came out of the mold. As the cylinder was slowly pulled out, two smooth and new cores were pulled out. He Xiaolong couldn't wait.

View parts.
Chapter completed!