Chapter 287 The uncontrollable factory

Author: Half of the west wind and half of the sand

Chapter 287 The uncontrollable factory

Ji Donglai was responsible for pushing the cart. Li Baoping didn't say much, but instead checked every size of the processed parts step by step. Both of them detected the key marks on the drawings.

Because it was testing against the processing order, Ji Donglai's last step was to detect the primary processing of the pump body. At this point, Ji Donglai's eyes were almost falling off.

The workshop workers almost drove the ordinary lathes away, and the iron filings on the cast iron pump body fell like snow flakes. The workers' operations were so fast.

According to the requirements of the process design card, the other party needs to follow up three times gradually, and the amount of each method cannot be too large. As a result, the workshop workers directly put the rest to the finishing CNC machine tool.

When processing a basket of products, workers would sit on the chair in front of them and wait for 20 minutes, then get in the car again and continue driving the car.

"Master Li, isn't this speed a little faster?"

Seeing that the workers did not perform the processing technology according to the process card, Ji Donglai subconsciously looked at Li Baoping. Li Baoping was testing the damping hole. He raised his head in surprise when he heard Ji Donglai say this.

"Can you understand the processing drawings?"

Putting down the pump body in his hand, Li Baoping took a look at it left and right, put the car in the designated area, and took Ji Donglai into the lounge.

"Well, my family has relatives who work in factories. I grew up with them since I was a child, so I know a little!"

Holding the Blueprint Process Card, Ji Donglai looked at various processing techniques of a pump body on site from front to back, and finally found that the on-site workers had violated more than one, and in a strict sense, almost none of them followed.

According to the requirements of the process card, the stop and inner cavity of the pump body are completed by two machine tools. The second step is to use tool clamps. During the on-site processing, the workshop workers have now completed the work on a lathe and have not used tool clamps at all, which means that the concentricity on the other side of the stop is lost.

Even if there is a later correction process, the pump body will have a risk of excessive thickness of a certain side wall, which is absolutely not allowed during industrial processing.

As for those high-pressure pump bodies, surface processing and internal milling, they have not been installed as required, which is very abnormal.

At least the concentricity of the bearing cannot be guaranteed. If you encounter a master, you will have no problem. If you neglect it, the quality of this product will be almost freezing.

"Remember here and say less, read more, listen more! I really think this place is not good, remember not to stay here. Look at the workshop, all the people have to stay here. Those who are really capable will not choose to stay here!"

"Besides, the boss doesn't rely on this to make money? The boss now hopes that the processing factory will be ruined, and then these old employees will resign. Will he be able to sell this land?"

"Can't we see what you can see? You will know when you wait until the pump body finished workshop, and we will know that there are also our quality inspectors there, and they are also testing. Can't they detect this problem? All of them can, but everyone has reached a tacit understanding and no one cares!"

"In the future, I will join the technical department. Don't compete with the people in the workshop. Don't explain these words to anyone today? It's easy to be caught by those who are interested. This factory is much deeper than you can see!"

Unscrew the plastic water cup and Li Baoping took a sip of water. Ji Donglai couldn't help but be shocked and thought to himself that he had done the right thing.

He hurriedly took out a small bag of tea from his pocket and gave it to Li Baoping. It was given to Ji Donglai by the supplier. Ji Donglai gave it to Li Baoping this time.

The other party was very helpful, and then began to popularize Ji Donglai's past and present life.

Li Baoping has been internship in this factory for twenty years since he was 18 years old. The processing plant was originally profitable, but even in an economic crisis, the factory still had a balanced income and expenditure.

The other two companies lost money, including foundry factories, which happened to catch up with the tide of privatization of state-owned enterprises.

In order to privatize these properties, Zhang Qinglu and the leaders of several other factories transferred all the debts to Jichuan Pump Industry and then split the company.

The other bosses were debt-free and spent a small amount of money to buy factories and manufacture them in other places for production and processing. Zhang Qinglu naturally obtained the trademark and land use rights of Jichuan Pump Industry.

According to the agreement, the severance allowance for each worker in the factory is 100,000 yuan. Zhang Qinglu wanted to give it less, but the workers never agreed. After all, that was a lot of money.

The number of workers in the account is 300, and all the workers are paid will be paid, and Zhang Qinglu will have to take out at least 30 million.

Now that the value of the factory land is rising, Zhang Qinglu is anxious, so he continues to hire new general managers to come and negotiate with the workers, but the results are very little.

Zhang Qinglu then changed her strategy and relied on time!

Some elderly people in the factory have basic diseases. After the factory is privatized, the heating belongs to the heating company, and the burns are not good, and the workers are very cold in winter.

In summer, the electric fans in the company's workshop were almost broken. Even if they could be blown, they would not have much cooling effect.

In this way, the old worker couldn't stand it and had to resign.

Since ancient times, there is no compensation for resigning? It is two different concepts and factory severance, and many people have no choice but to do this.

Last year, Zhang Qinglu didn't know where to come from. The upper and lower parts of the factory were in the piece-by-piece mode, so he took today's pump body and the price was two yuan for processing.

Each process was priced, so the factory almost fell into a madness. The subsequent processes were the end of the previous process, and the prices were very low. In order to make more income, the workers behind even went to the lathe workshop to urge.

Unreasonable processing technology implementation will inevitably lead to a rapid decline in product quality. Now the product quality of the entire factory can no longer be described as poor.

The best way to destroy the factory is to destroy this brand. Originally, the steering pumps and oil pumps of Jichuan Pump Industry were designated products of local BAIC, but now the market share is getting lower and lower. If it is not done well in a few years, it will be reset to zero.

By that time, workers could only accept the fact that the factory went bankrupt, and the land was naturally auctioned off, while Zhang Qinglu is now using the factory to continuously borrow loans. As for the flow of funds, only geniuses know.

The outside world now knows only one thing, the quality of the product in this factory can no longer be controlled.

Of course, Zhang Qinglu is still thinking about one thing: sell the product, and then transfer the money through international lawsuits and compensation methods.

The final conclusion was analyzed by Ji Donglai himself, not given by Li Baoping.

Combined with Li Baoping's explanation to Ji Donglai, and Zhang Qinglu seeks Ji Donglai's help to sell such poor quality products to the outside world, searching for his own memories, this conclusion almost instantly.
Chapter completed!