Chapter 448 The driving effect of core technology

Author: Half of the west wind and half of the sand

Chapter 448 The driving effect of core technology

"Mr. Ji, have you made your vulcanizer yourself?"

Looking at the 800-ton rubber vulcanizer, Wu Jun was slightly surprised.

The mold on this equipment is three layers, with hundreds of glue strips at a time, and eight injection points on both sides, without water channels. During the molding process, the mold position is turned up and down.

Wu Jun admires the clever craftsmanship setting, the attentiveness on the mold, and the super high yield rate.

"We made all of them ourselves. We used the 50-ton small rubber vulcanizer for a while in the early stage, but it was becoming increasingly difficult for the thing to meet our production requirements, so we started to make our own products in the equipment workshop."

"In terms of rubber equipment, we have the ability to design, manufacture and upgrade in all aspects. Rubber continuous honeycomb is our last breakthrough equipment, but it is definitely not the final point. In a few years, we will overcome more equipment in the same industry. Mr. Wu wants to make some of this equipment?"

Looking at Wu Jun's eyes, Ji Donglai knew that the other party was moved.

Many of their own equipment are made based on on-site applications. Unlike the external standard equipment, users can only use the machine mechanically.

The vulcanizer in front of Ji Donglai can automatically produce molds and divide molds and automatically inject molds.

An 800-ton rubber vulcanizer has a mold of one meter, two times two meter, three meter, three meter, four, and the mold is placed in the designated position. Next, it is all the machine independent. The operator only needs to screw the bolt hole into the positive bolt hole.

After the mold is positioned, the machine will automatically check whether it is aligned, automatically correct the position of the lower half of the mold, and the electric pressure plate will automatically lock.

The feeding mouth is a semi-finished rubber material that comes directly from the continuous honey mixer. The operator only needs to send the rubber strip to the feeding mouth, and the feeding screw can be automatically eaten.

The rubber material exists in the whole roll. Each time the machine stacks five rolls, the porter will deliver the rubber material according to the requirements of the machine. If the worker does not deliver, the machine operator can directly press the Cuimei switch. If more than three times, the porter will deduct the full attendance award directly.

Although it is a large equipment worth more than 800 tons, it goes without saying that one worker can see three machines with a large output and low cost. Wu Jun is jealous of it.

What surprised Wu Jun even more was that Ji Donglai could also add a vacuum cover to such a large equipment, so that the vacuum can be evacuated during the processing of some products to avoid the product from being smeared and gas-fired, which greatly improves the molding rate of the product.

"Mr. Ji, tell you the truth. I want to use a complete production line like yours. I want to use it from glue refining to vulcanization workshop. Do you output all the processes? If it is output, we can place an order today. We originally thought that Li Ming had done well, but we didn't expect that Li Ming's junior brother did better and was awesome."

Unlike the inspectors in the first two groups, Wu Jun looked at the molding workshop for an hour, from the details to the tall and high-end mechanical equipment, especially the vertical injection machines transformed by Ji Donglai.

This thing is great for making iron clips. There are also many small work clothes made by Ji Donglai factory, which are loaded at one time, avoiding the materials being cooked first and then cooked, and the materials being cooked from the adhesive.

Wu Jun looked at the production line layout, process, and even the arrangement of various facilities in the workshop very carefully. He concluded that there was only one of his workshops, and he had to be renovated and majorly modified.

: : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : :
Chapter completed!